diff --git a/salt/common/tools/sbin/so-common b/salt/common/tools/sbin/so-common
index 3cf1f5e88..a706831fa 100755
--- a/salt/common/tools/sbin/so-common
+++ b/salt/common/tools/sbin/so-common
@@ -86,10 +86,82 @@ add_interface_bond0() {
 	fi
 }
 
+check_container() {
+	docker ps | grep "$1:" > /dev/null 2>&1
+	return $?
+}
+
+check_password() {
+	local password=$1
+	echo "$password" | egrep -v "'|\"|\\$|\\\\" > /dev/null 2>&1
+	return $?
+}
+
+fail() {
+	msg=$1
+	echo "ERROR: $msg"
+	echo "Exiting."
+	exit 1
+}
+
+get_random_value() {
+	length=${1:-20}
+	head -c 5000 /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $length | head -n 1
+}
+
 header() {
 	printf '%s\n' "" "$banner" " $*" "$banner" 
 }
 
+init_monitor() {
+	MONITORNIC=$1
+	
+	if [[ $MONITORNIC == "bond0" ]]; then 
+	  BIFACES=$(lookup_bond_interfaces)
+	else
+	  BIFACES=$MONITORNIC
+	fi
+
+	for DEVICE_IFACE in $BIFACES; do
+	  for i in rx tx sg tso ufo gso gro lro; do
+	    ethtool -K "$DEVICE_IFACE" "$i" off;
+  	  done
+	  ip link set dev "$DEVICE_IFACE" arp off multicast off allmulticast off promisc on
+	done
+}
+
+is_manager_node() {
+	# Check to see if this is a manager node
+	role=$(lookup_role)
+	is_single_node_grid && return 0
+	[ $role == 'manager' ] && return 0
+	[ $role == 'managersearch' ] && return 0
+	[ $role == 'helix' ] && return 0
+	return 1
+}
+
+is_sensor_node() {
+	# Check to see if this is a sensor (forward) node
+	role=$(lookup_role)
+	is_single_node_grid && return 0
+	[ $role == 'sensor' ] && return 0
+	[ $role == 'heavynode' ] && return 0
+	[ $role == 'helix' ] && return 0
+	return 1
+}
+
+is_single_node_grid() {
+	role=$(lookup_role)
+	[ $role == 'eval' ] && return 0
+	[ $role == 'standalone' ] && return 0
+	[ $role == 'import' ] && return 0
+	return 1
+}
+
+lookup_bond_interfaces() {
+	cat /proc/net/bonding/bond0 | grep "Slave Interface:" | sed -e "s/Slave Interface: //g"
+}
+
 lookup_salt_value() {
 	key=$1
 	group=$2
@@ -129,15 +201,41 @@ lookup_role() {
 	echo ${pieces[1]}
 }
 
-check_container() {
-	docker ps | grep "$1:" > /dev/null 2>&1
-	return $?
+require_manager() {
+	if is_manager_node; then
+		echo "This is a manager, We can proceed."
+	else
+		echo "Please run this command on the manager; the manager controls the grid."
+		exit 1
+	fi
 }
 
-check_password() {
-	local password=$1
-	echo "$password" | egrep -v "'|\"|\\$|\\\\" > /dev/null 2>&1
-	return $?
+retry() {
+	maxAttempts=$1
+	sleepDelay=$2
+	cmd=$3
+	expectedOutput=$4
+	attempt=0
+	while [[ $attempt -lt $maxAttempts ]]; do			
+		attempt=$((attempt+1))
+		echo "Executing command with retry support: $cmd"
+		output=$(eval "$cmd")
+		exitcode=$?
+		echo "Results: $output ($exitcode)"
+		if [ -n "$expectedOutput" ]; then
+			if [[ "$output" =~ "$expectedOutput" ]]; then
+				return $exitCode
+			else
+				echo "Expected '$expectedOutput' but got '$output'"
+			fi
+		elif [[ $exitcode -eq 0 ]]; then
+			return $exitCode
+		fi
+		echo "Command failed with exit code $exitcode; will retry in $sleepDelay seconds ($attempt / $maxAttempts)..."
+		sleep $sleepDelay
+	done
+	echo "Command continues to fail; giving up."
+	return 1
 }
 
 set_os() {
@@ -171,83 +269,6 @@ set_version() {
 	fi
 }
 
-require_manager() {
-	if is_manager_node; then
-		echo "This is a manager, We can proceed."
-	else
-		echo "Please run this command on the manager; the manager controls the grid."
-		exit 1
-	fi
-}
-
-is_manager_node() {
-	# Check to see if this is a manager node
-	role=$(lookup_role)
-	is_single_node_grid && return 0
-	[ $role == 'manager' ] && return 0
-	[ $role == 'managersearch' ] && return 0
-	[ $role == 'helix' ] && return 0
-	return 1
-}
-
-is_sensor_node() {
-	# Check to see if this is a sensor (forward) node
-	role=$(lookup_role)
-	is_single_node_grid && return 0
-	[ $role == 'sensor' ] && return 0
-	[ $role == 'heavynode' ] && return 0
-	[ $role == 'helix' ] && return 0
-	return 1
-}
-
-is_single_node_grid() {
-	role=$(lookup_role)
-	[ $role == 'eval' ] && return 0
-	[ $role == 'standalone' ] && return 0
-	[ $role == 'import' ] && return 0
-	return 1
-}
-
-fail() {
-	msg=$1
-	echo "ERROR: $msg"
-	echo "Exiting."
-	exit 1
-}
-
-get_random_value() {
-	length=${1:-20}
-	head -c 5000 /dev/urandom | tr -dc 'a-zA-Z0-9' | fold -w $length | head -n 1
-}
-
-retry() {
-	maxAttempts=$1
-	sleepDelay=$2
-	cmd=$3
-	expectedOutput=$4
-	attempt=0
-	while [[ $attempt -lt $maxAttempts ]]; do			
-		attempt=$((attempt+1))
-		echo "Executing command with retry support: $cmd"
-		output=$(eval "$cmd")
-		exitcode=$?
-		echo "Results: $output ($exitcode)"
-		if [ -n "$expectedOutput" ]; then
-			if [[ "$output" =~ "$expectedOutput" ]]; then
-				return $exitCode
-			else
-				echo "Expected '$expectedOutput' but got '$output'"
-			fi
-		elif [[ $exitcode -eq 0 ]]; then
-			return $exitCode
-		fi
-		echo "Command failed with exit code $exitcode; will retry in $sleepDelay seconds ($attempt / $maxAttempts)..."
-		sleep $sleepDelay
-	done
-	echo "Command continues to fail; giving up."
-	return 1
-}
-
 valid_cidr() {
 	# Verify there is a backslash in the string
 	echo "$1" | grep -qP "^[^/]+/[^/]+$" || return 1
diff --git a/salt/common/tools/sbin/soup b/salt/common/tools/sbin/soup
index 1ea63b70b..6eb01a694 100755
--- a/salt/common/tools/sbin/soup
+++ b/salt/common/tools/sbin/soup
@@ -121,17 +121,13 @@ check_sudoers() {
 }
 
 check_log_size_limit() {
-  local wait_for_enter=false
 
   local num_minion_pillars
   num_minion_pillars=$(find /opt/so/saltstack/local/pillar/minions/ -type f | wc -l)
   
   if [[ $num_minion_pillars -gt 1 ]]; then
     if find /opt/so/saltstack/local/pillar/minions/ -type f | grep -q "_heavynode"; then
-      wait_for_enter=true
-      echo "[INFO] The value of log_size_limit in any heavy node minion pillars may be incorrect."
-      echo " -> We recommend checking and adjusting the values as necessary."
-      echo " -> Minion pillar directory: /opt/so/saltstack/local/pillar/minions/"
+      lsl_msg='distributed'
     fi
   else
     local minion_id
@@ -172,16 +168,8 @@ check_log_size_limit() {
     new_limit=$( echo "$disk_size_gb" "$percent" | awk '{printf("%.0f", $1 * ($2/100))}')
 
     if [[ $current_limit != "$new_limit" ]]; then
-    wait_for_enter=true
-      echo "[WARNING] The value of log_size_limit (${current_limit}) does not match the recommended value of ${new_limit}."
-      echo " -> We recommend checking and adjusting the value as necessary."
-      echo " -> File: /opt/so/saltstack/local/pillar/minions/${minion_id}.sls"
-    fi
-
-    if [[ $wait_for_enter == true ]]; then
-      echo ""
-      read -n 1 -s -r -p "Press any key to continue..."
-      echo "" # Since read doesn't print a newline, print one for it
+      lsl_msg='single-node'
+      lsl_details=( "$current_limit" "$new_limit" "$minion_id" )
     fi
   fi
 }
@@ -742,7 +730,21 @@ fi
 
 check_sudoers
 
-
+if [[ -n $lsl_msg ]]; then
+  case $lsl_msg in
+    'distributed')
+      echo "[INFO] The value of log_size_limit in any heavy node minion pillars may be incorrect."
+      echo " -> We recommend checking and adjusting the values as necessary."
+      echo " -> Minion pillar directory: /opt/so/saltstack/local/pillar/minions/"
+    ;;
+    'single-node')
+      # We can assume the lsl_details array has been set if lsl_msg has this value
+      echo "[WARNING] The value of log_size_limit (${lsl_details[0]}) does not match the recommended value of ${lsl_details[1]}."
+      echo " -> We recommend checking and adjusting the value as necessary."
+      echo " -> File: /opt/so/saltstack/local/pillar/minions/${lsl_details[2]}.sls"
+    ;;
+  esac
+fi
 
 }
 
diff --git a/salt/salt/master.defaults.yaml b/salt/salt/master.defaults.yaml
index e774a2c7d..2b50b517b 100644
--- a/salt/salt/master.defaults.yaml
+++ b/salt/salt/master.defaults.yaml
@@ -2,4 +2,4 @@
 # When updating the salt version, also update the version in securityonion-builds/images/iso-task/Dockerfile and saltify function in so-functions
 salt:
   master:
-    version: 3002.2
\ No newline at end of file
+    version: 3002.5
\ No newline at end of file
diff --git a/salt/salt/minion.defaults.yaml b/salt/salt/minion.defaults.yaml
index baaaff411..e6b1303ed 100644
--- a/salt/salt/minion.defaults.yaml
+++ b/salt/salt/minion.defaults.yaml
@@ -2,5 +2,5 @@
 # When updating the salt version, also update the version in securityonion-builds/images/iso-task/Dockerfile and saltify function in so-functions
 salt:
   minion:
-    version: 3002.2
+    version: 3002.5
     check_threshold: 3600 # in seconds, threshold used for so-salt-minion-check. any value less than 600 seconds may cause a lot of salt-minion restarts since the job to touch the file occurs every 5-8 minutes by default
\ No newline at end of file
diff --git a/salt/soc/files/soc/hunt.queries.json b/salt/soc/files/soc/hunt.queries.json
index edd0397c9..b8dc5eb21 100644
--- a/salt/soc/files/soc/hunt.queries.json
+++ b/salt/soc/files/soc/hunt.queries.json
@@ -53,10 +53,10 @@
           { "name": "SMTP", "description": "SMTP grouped by subject", "query": "event.dataset:smtp | groupby smtp.subject"},
           { "name": "SNMP", "description": "SNMP grouped by version and string", "query": "event.dataset:snmp | groupby snmp.community snmp.version"},
           { "name": "Software", "description": "List of software seen on the network", "query": "event.dataset:software | groupby software.type software.name"},
-          { "name": "SSH", "description": "SSH grouped by version", "query": "event.dataset:ssh | groupby ssh.version"},
+          { "name": "SSH", "description": "SSH grouped by version and client", "query": "event.dataset:ssh | groupby ssh.version ssh.client"},
           { "name": "SSL", "description": "SSL grouped by version and server name", "query": "event.dataset:ssl | groupby ssl.version ssl.server_name"},
           { "name": "SYSLOG", "description": "SYSLOG grouped by severity and facility ", "query": "event.dataset:syslog | groupby syslog.severity syslog.facility"},
-          { "name": "Tunnel", "description": "Tunnels grouped by action", "query": "event.dataset:tunnel | groupby event.action"},
+          { "name": "Tunnel", "description": "Tunnels grouped by type and action", "query": "event.dataset:tunnel | groupby tunnel.type event.action"},
           { "name": "Weird", "description": "Zeek weird log grouped by name", "query": "event.dataset:weird | groupby weird.name"},
           { "name": "x509", "description": "x.509 grouped by key length and name", "query": "event.dataset:x509 | groupby x509.certificate.key.length x509.san_dns"},
           { "name": "x509", "description": "x.509 grouped by name and issuer", "query": "event.dataset:x509 | groupby x509.san_dns x509.certificate.issuer"},
diff --git a/setup/install_scripts/99-so-checksum-offload-disable b/setup/install_scripts/99-so-checksum-offload-disable
index e12049301..63f9c0a4c 100755
--- a/setup/install_scripts/99-so-checksum-offload-disable
+++ b/setup/install_scripts/99-so-checksum-offload-disable
@@ -1,8 +1,20 @@
 #!/bin/bash
+#
+# Copyright 2014,2015,2016,2017,2018,2019,2020,2021 Security Onion Solutions, LLC
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-if [[ "$DEVICE_IFACE" != "$MNIC" && "$DEVICE_IFACE" != *"docker"* && "$DEVICE_IFACE" != *"tun"* && "DEVICE_IFACE" != *"wg"* ]]; then
-	for i in rx tx sg tso ufo gso gro lro; do
-		ethtool -K "$DEVICE_IFACE" "$i" off;
-  	done
-	ip link set dev "$DEVICE_IFACE" arp off multicast off allmulticast off promisc on
-fi
+. /usr/sbin/so-common
+
+init_monitor $MNIC
diff --git a/setup/so-functions b/setup/so-functions
index 0ad993d3d..52865b5f1 100755
--- a/setup/so-functions
+++ b/setup/so-functions
@@ -160,10 +160,10 @@ check_network_manager_conf() {
 		} >> "$setup_log" 2>&1
 	fi
 	
-	if test -f "$nmconf"; then
-		sed -i 's/managed=false/managed=true/g' "$nmconf" >> "$setup_log" 2>&1
-		systemctl restart NetworkManager >> "$setup_log" 2>&1
-	fi
+	#if test -f "$nmconf"; then
+#		sed -i 's/managed=false/managed=true/g' "$nmconf" >> "$setup_log" 2>&1
+#		systemctl restart NetworkManager >> "$setup_log" 2>&1
+#	fi
 
 	if [[ ! -d "$preupdir" ]]; then
 		mkdir "$preupdir" >> "$setup_log" 2>&1
@@ -751,15 +751,22 @@ check_sos_appliance() {
 }
 
 compare_main_nic_ip() {
-	if [[ "$MAINIP" != "$MNIC_IP" ]]; then
-		read -r -d '' message <<- EOM
-			The IP being routed by Linux is not the IP address assigned to the management interface ($MNIC).
+	if ! [[ $MNIC =~ ^(tun|wg|vpn).*$ ]]; then
+	  if [[ "$MAINIP" != "$MNIC_IP" ]]; then
+		  read -r -d '' message <<- EOM
+		  	The IP being routed by Linux is not the IP address assigned to the management interface ($MNIC).
 
 			This is not a supported configuration, please remediate and rerun setup.
 		EOM
-		whiptail --title "Security Onion Setup" --msgbox "$message" 10 75
-		kill -SIGINT "$(ps --pid $$ -oppid=)"; exit 1
+		  whiptail --title "Security Onion Setup" --msgbox "$message" 10 75
+		  kill -SIGINT "$(ps --pid $$ -oppid=)"; exit 1
+	  fi
+	else
+		# Setup uses MAINIP, but since we ignore the equality condition when using a VPN 
+		# just set the variable to the IP of the VPN interface
+		MAINIP=$MNIC_IP
 	fi
+	
 }
 
 compare_versions() {
@@ -1005,33 +1012,38 @@ disable_ipv6() {
 		sysctl -w net.ipv6.conf.all.disable_ipv6=1
 		sysctl -w net.ipv6.conf.default.disable_ipv6=1
 	}  >> "$setup_log" 2>&1
+        {
+        echo "net.ipv6.conf.all.disable_ipv6 = 1"
+        echo "net.ipv6.conf.default.disable_ipv6 = 1"
+        echo "net.ipv6.conf.lo.disable_ipv6 = 1" 
+        } >> /etc/sysctl.conf
 }
 
-disable_misc_network_features() {
-	filter_unused_nics
-	if [ ${#filtered_nics[@]} -ne 0 ]; then
-		for unused_nic in "${filtered_nics[@]}"; do
-			if [ -n "$unused_nic" ]; then
-				echo "Disabling unused NIC: $unused_nic" >> "$setup_log" 2>&1
-
-				# Disable DHCPv4/v6 and autoconnect
-				nmcli con mod "$unused_nic" \
-					ipv4.method disabled \
-					ipv6.method ignore \
-					connection.autoconnect "no" >> "$setup_log" 2>&1
-
-				# Flush any existing IPs
-				ip addr flush "$unused_nic" >> "$setup_log" 2>&1
-			fi
-		done
-	fi
-	# Disable IPv6
-	{ 
-		echo "net.ipv6.conf.all.disable_ipv6 = 1"
-		echo "net.ipv6.conf.default.disable_ipv6 = 1"
-		echo "net.ipv6.conf.lo.disable_ipv6 = 1" 
-	} >> /etc/sysctl.conf
-}
+#disable_misc_network_features() {
+#	filter_unused_nics
+#	if [ ${#filtered_nics[@]} -ne 0 ]; then
+#		for unused_nic in "${filtered_nics[@]}"; do
+#			if [ -n "$unused_nic" ]; then
+#				echo "Disabling unused NIC: $unused_nic" >> "$setup_log" 2>&1
+#
+#				# Disable DHCPv4/v6 and autoconnect
+#				nmcli con mod "$unused_nic" \
+#					ipv4.method disabled \
+#					ipv6.method ignore \
+#					connection.autoconnect "no" >> "$setup_log" 2>&1
+#
+#				# Flush any existing IPs
+#				ip addr flush "$unused_nic" >> "$setup_log" 2>&1
+#			fi
+#		done
+#	fi
+#	# Disable IPv6
+#	{ 
+#		echo "net.ipv6.conf.all.disable_ipv6 = 1"
+#		echo "net.ipv6.conf.default.disable_ipv6 = 1"
+#		echo "net.ipv6.conf.lo.disable_ipv6 = 1" 
+#	} >> /etc/sysctl.conf
+#}
 
 docker_install() {
 
@@ -1223,7 +1235,7 @@ filter_unused_nics() {
 	fi
 
 	# Finally, set filtered_nics to any NICs we aren't using (and ignore interfaces that aren't of use)
-	filtered_nics=$(ip link | awk -F: '$0 !~ "lo|vir|veth|br|docker|tun|wg|wl|^[^0-9]"{print $2}' | grep -vwe "$grep_string"  | sed 's/ //g')
+	filtered_nics=$(ip link | awk -F: '$0 !~ "lo|vir|veth|br|docker|wl|^[^0-9]"{print $2}' | grep -vwe "$grep_string"  | sed 's/ //g')
 	readarray -t filtered_nics <<< "$filtered_nics"
 	
 	nic_list=()
@@ -1720,17 +1732,11 @@ network_setup() {
 		echo "... Verifying all network devices are managed by Network Manager";
 		check_network_manager_conf;
 
-		echo "... Disabling unused NICs";
-		disable_misc_network_features;
-
-		echo "... Setting ONBOOT for management interface";
-		command -v netplan &> /dev/null || nmcli con mod "$MNIC" connection.autoconnect "yes"
-
 		echo "... Copying 99-so-checksum-offload-disable";
 		cp ./install_scripts/99-so-checksum-offload-disable /etc/NetworkManager/dispatcher.d/pre-up.d/99-so-checksum-offload-disable ;
 
 		echo "... Modifying 99-so-checksum-offload-disable";
-		sed -i "s/\$MNIC/${MNIC}/g" /etc/NetworkManager/dispatcher.d/pre-up.d/99-so-checksum-offload-disable;
+		sed -i "s/\$MNIC/${INTERFACE}/g" /etc/NetworkManager/dispatcher.d/pre-up.d/99-so-checksum-offload-disable;
 	} >> "$setup_log" 2>&1
 }
 
@@ -1899,7 +1905,7 @@ saltify() {
 	if [ $OS = 'centos' ]; then
 		set_progress_str 5 'Installing Salt repo'
 		{
-			sudo rpm --import https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.2/SALTSTACK-GPG-KEY.pub;
+			sudo rpm --import https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.5/SALTSTACK-GPG-KEY.pub;
 			cp ./yum_repos/saltstack.repo /etc/yum.repos.d/saltstack.repo;
 		} >> "$setup_log" 2>&1
 		set_progress_str 6 'Installing various dependencies'
@@ -1916,14 +1922,14 @@ saltify() {
 				# Download Ubuntu Keys in case manager updates = 1
 				mkdir -p /opt/so/gpg >> "$setup_log" 2>&1
 				if [[ ! $is_airgap ]]; then
-				  logCmd "wget -q --inet4-only -O /opt/so/gpg/SALTSTACK-GPG-KEY.pub https://repo.saltstack.com/py3/ubuntu/18.04/amd64/archive/3002.2/SALTSTACK-GPG-KEY.pub"
+				  logCmd "wget -q --inet4-only -O /opt/so/gpg/SALTSTACK-GPG-KEY.pub https://repo.saltstack.com/py3/ubuntu/18.04/amd64/archive/3002.5/SALTSTACK-GPG-KEY.pub"
 				  logCmd "wget -q --inet4-only -O /opt/so/gpg/docker.pub https://download.docker.com/linux/ubuntu/gpg"
 				  logCmd "wget -q --inet4-only -O /opt/so/gpg/GPG-KEY-WAZUH https://packages.wazuh.com/key/GPG-KEY-WAZUH"
 				  logCmd "cp ./yum_repos/wazuh.repo /etc/yum.repos.d/wazuh.repo"
 				fi
 				set_progress_str 7 'Installing salt-master'
 				if [[ ! $is_iso ]]; then
-				  logCmd "yum -y install salt-master-3002.2"
+				  logCmd "yum -y install salt-master-3002.5"
 				fi
 				systemctl enable salt-master >> "$setup_log" 2>&1
 				;;
@@ -1951,7 +1957,7 @@ saltify() {
 		{
 			if [[ ! $is_iso ]]; then
 			  yum -y install epel-release
-			  yum -y install salt-minion-3002.2\
+			  yum -y install salt-minion-3002.5\
 			   	python3\
 					python36-docker\
 					python36-dateutil\
@@ -2002,8 +2008,8 @@ saltify() {
 			'MANAGER' | 'EVAL' | 'MANAGERSEARCH' | 'STANDALONE' | 'IMPORT' | 'HELIXSENSOR')
 
 				# Add saltstack repo(s)
-				wget -q --inet4-only -O - https://repo.saltstack.com"$py_ver_url_path"/ubuntu/"$ubuntu_version"/amd64/archive/3002.2/SALTSTACK-GPG-KEY.pub | apt-key add - >> "$setup_log" 2>&1
-				echo "deb http://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.2 $OSVER main" > /etc/apt/sources.list.d/saltstack.list 2>> "$setup_log"
+				wget -q --inet4-only -O - https://repo.saltstack.com"$py_ver_url_path"/ubuntu/"$ubuntu_version"/amd64/archive/3002.5/SALTSTACK-GPG-KEY.pub | apt-key add - >> "$setup_log" 2>&1
+				echo "deb http://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.5 $OSVER main" > /etc/apt/sources.list.d/saltstack.list 2>> "$setup_log"
 
 				# Add Docker repo
 				curl -fsSL https://download.docker.com/linux/ubuntu/gpg | apt-key add - >> "$setup_log" 2>&1
@@ -2011,7 +2017,7 @@ saltify() {
 
 				# Get gpg keys
 				mkdir -p /opt/so/gpg >> "$setup_log" 2>&1
-				wget -q --inet4-only -O /opt/so/gpg/SALTSTACK-GPG-KEY.pub https://repo.saltstack.com$py_ver_url_path/ubuntu/"$ubuntu_version"/amd64/archive/3002.2/SALTSTACK-GPG-KEY.pub >> "$setup_log" 2>&1
+				wget -q --inet4-only -O /opt/so/gpg/SALTSTACK-GPG-KEY.pub https://repo.saltstack.com$py_ver_url_path/ubuntu/"$ubuntu_version"/amd64/archive/3002.5/SALTSTACK-GPG-KEY.pub >> "$setup_log" 2>&1
 				wget -q --inet4-only -O /opt/so/gpg/docker.pub https://download.docker.com/linux/ubuntu/gpg >> "$setup_log" 2>&1
 				wget -q --inet4-only -O /opt/so/gpg/GPG-KEY-WAZUH https://packages.wazuh.com/key/GPG-KEY-WAZUH >> "$setup_log" 2>&1
 
@@ -2024,7 +2030,7 @@ saltify() {
 				set_progress_str 6 'Installing various dependencies'
 				retry 50 10 "apt-get -y install sqlite3 argon2 libssl-dev" >> "$setup_log" 2>&1 || exit 1
 				set_progress_str 7 'Installing salt-master'
-				retry 50 10 "apt-get -y install salt-master=3002.2+ds-1" >> "$setup_log" 2>&1 || exit 1
+				retry 50 10 "apt-get -y install salt-master=3002.5+ds-1" >> "$setup_log" 2>&1 || exit 1
 				retry 50 10 "apt-mark hold salt-master" >> "$setup_log" 2>&1 || exit 1
 				;;
 			*)
@@ -2035,14 +2041,14 @@ saltify() {
 				echo "Using apt-key add to add SALTSTACK-GPG-KEY.pub and GPG-KEY-WAZUH" >> "$setup_log" 2>&1
 				apt-key add "$temp_install_dir"/gpg/SALTSTACK-GPG-KEY.pub >> "$setup_log" 2>&1
 				apt-key add "$temp_install_dir"/gpg/GPG-KEY-WAZUH >> "$setup_log" 2>&1
-				echo "deb http://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.2/ $OSVER main" > /etc/apt/sources.list.d/saltstack.list 2>> "$setup_log"
+				echo "deb http://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.5/ $OSVER main" > /etc/apt/sources.list.d/saltstack.list 2>> "$setup_log"
 				echo "deb https://packages.wazuh.com/3.x/apt/ stable main" > /etc/apt/sources.list.d/wazuh.list 2>> "$setup_log"
 				;;
 		esac
 
 		retry 50 10 "apt-get update" >> "$setup_log" 2>&1 || exit 1
 		set_progress_str 8 'Installing salt-minion & python modules'
-		retry 50 10 "apt-get -y install salt-minion=3002.2+ds-1 salt-common=3002.2+ds-1" >> "$setup_log" 2>&1 || exit 1
+		retry 50 10 "apt-get -y install salt-minion=3002.5+ds-1 salt-common=3002.5+ds-1" >> "$setup_log" 2>&1 || exit 1
 		retry 50 10 "apt-mark hold salt-minion salt-common" >> "$setup_log" 2>&1 || exit 1
 		if [[ $OSVER != 'xenial' ]]; then
 			retry 50 10 "apt-get -y install python3-pip python3-dateutil python3-m2crypto python3-mysqldb" >> "$setup_log" 2>&1 || exit 1
@@ -2333,8 +2339,6 @@ set_hostname() {
 
 set_initial_firewall_policy() {
 
-  set_main_ip
-
   if [ -f $default_salt_dir/pillar/data/addtotab.sh ]; then chmod +x $default_salt_dir/pillar/data/addtotab.sh; fi
   if [ -f $default_salt_dir/salt/common/tools/sbin/so-firewall ]; then chmod +x $default_salt_dir/salt/common/tools/sbin/so-firewall; fi
 
diff --git a/setup/so-preflight b/setup/so-preflight
index 69435446a..da25e6775 100644
--- a/setup/so-preflight
+++ b/setup/so-preflight
@@ -46,8 +46,8 @@ check_new_repos() {
 	if [[ $OS == 'centos' ]]; then
 		local repo_arr=( 
 			"https://download.docker.com/linux/centos/docker-ce.repo"
-			"https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.2/SALTSTACK-GPG-KEY.pub"
-			"https://repo.saltstack.com/py3/ubuntu/18.04/amd64/archive/3002.2/SALTSTACK-GPG-KEY.pub"
+			"https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.5/SALTSTACK-GPG-KEY.pub"
+			"https://repo.saltstack.com/py3/ubuntu/18.04/amd64/archive/3002.5/SALTSTACK-GPG-KEY.pub"
 			"https://download.docker.com/linux/ubuntu/gpg"
 			"https://packages.wazuh.com/key/GPG-KEY-WAZUH"
 			"https://packages.wazuh.com/3.x/yum/"
@@ -59,7 +59,7 @@ check_new_repos() {
 		local repo_arr=(
 			"https://download.docker.com/linux/ubuntu/gpg"
 			"https://download.docker.com/linux/ubuntu"
-			"https://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.2/SALTSTACK-GPG-KEY.pub"
+			"https://repo.saltstack.com$py_ver_url_path/ubuntu/$ubuntu_version/amd64/archive/3002.5/SALTSTACK-GPG-KEY.pub"
 			"https://packages.wazuh.com/key/GPG-KEY-WAZUH"
 			"https://packages.wazuh.com"
 		)
diff --git a/setup/yum_repos/saltstack.repo b/setup/yum_repos/saltstack.repo
index 856d4d80c..0430a62b8 100644
--- a/setup/yum_repos/saltstack.repo
+++ b/setup/yum_repos/saltstack.repo
@@ -1,6 +1,6 @@
 [saltstack]
 name=SaltStack repo for RHEL/CentOS $releasever PY3
-baseurl=https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.2/
+baseurl=https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.5/
 enabled=1
 gpgcheck=1
-gpgkey=https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.2/SALTSTACK-GPG-KEY.pub
\ No newline at end of file
+gpgkey=https://repo.saltstack.com/py3/redhat/7/x86_64/archive/3002.5/SALTSTACK-GPG-KEY.pub
\ No newline at end of file